Flagship Booster Stations

System Type:

Variable speed, end suction centrifugal

Applications:

Pressure Boosting, Suction Lift, Flooded Suction

Site Applications:

Parks, Schools, Housing Developments, Sports Fields, Residential and Commercial

• Compact, all-in-one, pre-packaged booster pump system
• Engineered for long-term reliability
• Innovative, easy to use touchscreen
• Unlimited, personalized technical support
• Remote control and monitoring available
• Pressure tank
• 24/7 Phone tech support
• Easy to use Start Up Wizard
• Optional heating and insulation
• Optional automatic priming pump for suction lift applications
• Available in custom colors

How to obtain a NOVA booster station Model Number for your specifications/drawings:

1) Using the desired flow (GPM) and pressure (PSI) find your pump type, horsepower & trim on the selection chart below:

SELECTION CHART (Pump – Horsepower – Trim Code)

*NOTE: Chart indicates TOTAL system boost pressure.

2) Determine the available service power (voltage and phase).

• These are the four power options available:

#241 = 230/240 Volt 1 Phase
#203 = 208 Volt 3 Phase
#243 = 230/240 Volt 3 Phase
#483 = 460/480 Volt 3 Phase

3) Select which accessories you wish to include with your NOVA.

• These are the accessories available (see drawings for details):

#A01 = S‐Drop (Suction & Discharge)
#A02 = Flow Meter
#A03 = Automatic pump By‐Pass
#A04 = High ambient temperature insulation and cooling
#A05 = Low ambient temperature insulation and heating

4) After you have made the selections described above, complete the NOVA model number as shown in the example below:

MODEL NUMBER NOMENCLATURE

Example (if your conditions are):

60 GPM @ 60 PSI BOOST + S-DROP for suction and discharge required + 480 Volt / 3 Phase Service + Automatic pump by-pass required

Your model number would be: NOVA-22BF-5-A-483+A01-A03

System Type:

Variable speed, end suction centrifugal

Applications:

Pressure Boosting, Suction Lift, Flooded Suction

Site Applications:

Parks, Schools, Housing Developments, Sports Fields, Residential and Commercial

• Compact, all-in-one, pre-packaged booster pump system
• Engineered for long-term reliability
• Innovative, easy to use touchscreen
• Unlimited, personalized technical support
• Remote control and monitoring available
• Pressure tank
• 24/7 Phone tech support
• Easy to use Start Up Wizard
• Optional heating and insulation
• Optional automatic priming pump for suction lift applications
• Available in custom colors

CONTROLLER FUNCTIONS:

Complete Automation

• Automatic start based on pressure drop or remote start relay.

• Maintains constant pressure at variable flows.

• Pump automatically enters sleep mode when demand stops and pressure setpoint is maintained.

System Protections

• Dry Run

• High Discharge Pressure

• High Flow, Low Flow

• Electrical Protections, including phase, voltage, current

Start-Up Assistant

• VFD programming for the motor

• System Sensor Activation & Calibration

• Operational Settings

• Discharge Pressure Setpoint

• Pump Sleep Settings

Troubleshooting Assistant

• System Alarms & Faults, Sensor Issues, & VFD/PLC Communication issues.

Password Protection

• For operator configurable settings

• Create New User, Operator, and Guest Accounts, with access limitations.

Features Fault, Trend & Operator Logs to Report System Functionality

INSTRUMENTATION:

Pressure Gauges

• Liquid filled stainless steel gauges.

Pressure Transmitter

• Stainless steel transmitter, transmits 4-20mA signal.

Flow Switch

• Compact stainless steel switch detects flow.

Flow Sensor (Optional)

• Non-magnetic, insertion flow sensor transmits flow rate to station controller.

CONTROLLER PRIMARY COMPONENTS:

Variable Frequency Drive (VFD)

• UL Listed, efficient VFD provides precise pressure control.

PLC/HMI

• CPU Module, with 3.5” Full color touchscreen, & Ethernet Port NEMA

3R Rated Disconnect Switch

• Padlockable disconnect switch with circuit-breaker protection.

Cell Modem (Optional)

• Allows for remote control and monitoring of pump station.

• Email and text message alarms.

MECHANICAL COMPONENTS:

Heavy Duty Pump & Motor

• Horizontal end-suction centrifugal pump, with mechanical seal, cast iron casing, and precision machined impellers.

• Premium efficient, open-drip proof motor.

Silent Check Valve

• Silent dual-disc check valve with grooved connection prevents reverse flow.

Butterfly Isolation Valves

• Grooved butterfly type with 10 position indicator to isolate the system for winterization/maintenance.

Air Relief Valve

• Continuously acting air relief valve releases entrained air.

Pressure Tank

• 2 gallon diaphragm type pressure tank stabilizes system pressure and prevents pump from short cycling.

Piping & Connections

• Powder coated steel piping provides superior corrosion resistance.

• Grooved connections and fittings for easy disassembly for winterization and maintenance.

• Optional HDPE Drop-pipe connection for quick tie-in piping network.

MARINE GRADE ALUMINUM ENCLOSURE:

• Protects the station from intruders and the elements.

• Low profile, compact design.

• Houses all components in an aesthetically pleasing enclosure.

• Custom colors available to suit the local environment.

• Lockable clamshell lid provides complete access to all system components.

• Thermosetting epoxy powder coating provides corrosion protection.

System Type:

Variable speed, end suction centrifugal with automatic filtration

Applications:

Pressure Boosting, Suction Lift, Reclaimed Water, Flooded Suction

Site Applications:

Parks, Schools, Housing Developments, Sports Fields, Residential and Commercial

• Compact, all-in-one, pre-packaged booster pump system
• Includes automatic self-cleaning suction scanner filtration
• Integrated filter controls eliminate the need for a secondary controller
• Self-cleaning mechanism requires no manual flushing of the system
• Considerably lower water and energy consumption
• Engineered for long-term reliability
• Innovative, easy to use touchscreen
• Unlimited, personalized technical support
• Remote control and monitoring available
• Pressure tank
• Easy to use Start Up Wizard
• Optional heating and insulation
• Optional automatic priming pump for suction lift applications
• Available in custom colors

System Type:

Variable speed, end suction centrifugal

Applications:

Clear, screened reclaimed water or general surface water

Site Applications:

Parks, Schools, Housing Developments, Sports Fields, Residential and Commercial

• Industrial grade, end-suction centrifugal pump
• Energy-saving variable frequency drive that matches pump output with demand
• User-friendly color touch-screen interface and powerful programmable logic controller
• 5052 H-32 Marine grade aluminum enclosure and corrosion-resistant base
• Locking door to prevent vandalism
• Run-dry and prime-loss protection
• Designed and built in the USA
• Powder-coated steel piping

System Type:

End suction centrifugal booster

Applications:

Potable Water, Pond, Lake, Canal, River Water

Site Applications:

Parks, Schools, Housing Developments, Sports Fields, Residential and Commercial

• Flows up to 500 GPM
• Industrial grade, Centrifugal, Multi-Stage, Turbine or Submersible Turbines
• Energy-saving variable frequency drive that matches pump output with demand
• Isolation valves intake / discharge
• Single or multiple pumps
• Simple HMI operation
• Easy operation and maintenance
• All components enclosed
• User-friendly color touch-screen interface and powerful programmable logic controller
• 5052 H-32 Marine grade aluminum enclosure and corrosion-resistant base
• Locking door to prevent vandalism
• Run-dry and prime-loss protection
• Designed and built in the USA
• 100% Powder-coated
• 48″ X 66″ footprint